All Flow Technology
|Place of Origin:||China|
|Minimum Order Quantity:||1|
|Delivery Time:||4-6 weeks|
|Payment Terms:||L/C, T/T, D/P|
|Product Name:||Vertical Brush Filter Housing||Material Of Construction:||SS304 , 316L ,|
|Operation Pressure:||300 Psi / 21 Bar||Max Temperature:||177 ℃|
|Flow Range:||0.45 - 45.4 M3/hr||Filter Area:||772 - 3935 Cm2|
|Drain Chamber Volume:||119 Ml - 6000 Ml||Total Volume:||3.5 L - 41.6 L|
|Air Requirement:||400/800=60 Psiat5 Cfm(4 Bar 8.5m3/min) 1600=80 Psiat5 Cfm (5 Bar 8.5m3/min)|
Self cleaning brush filter vessel by gravity filter down to 50 micron particle removal
The brush type self cleaning filter is mainly used in the fluid which contains more gravity impurities in liquid to be filterred. It's gravity filter.
Automatic self-cleaning filter is a kind of filter which is suitable for bad environment. It's with 3500 micron- 50 micron mesh and 8”-36”pipeline diameter for different using requirements. The cleaning process is started by a differential pressure switch which is monitoring the differential pressure of inlet and outlet, normally the pre-set value is 0.5bar (7psi).
Suitable for filters with DN25~DN900 pipeline to choose from. With advantages of continuously fluid flow, safety operation, simple maintenance, this kind of filter is widely used in all industries.
When the differential pressure of inlet and outlet reaches the pre-set value, the filter will start the cleaning process. The whole self-cleaning process includes two steps: 1. Turn on the drain valve which is on the filter top cover. 2. Two stainless steel brushes inside the filter mesh start to rotate which are driven by motor. The impurities captured by filter mesh are brushed by steel brush and discharged from drain outlet. The whole cleaning process takes about 15-60 seconds. During this time, the filtration system doesn’t interrupt the water supply and the whole operation process is controlled by a control box.
|Filter housing||CS / SS304 / 316L|
|Mesh media||SS304 / SS316L|
|Drive shaft seal||PTFE, teflon, up to 230 ℃|
|O ring||NBR, acrylic rubber, most neutral, oil liquid, up to 120 ℃|
|VITON fluorine rubber||alkaline, acid and other corrosion media, up 230 ℃,|
|Scraper / brush||SF type, super wear resistant, or SS type|
Operating flow rate: 20-5000m3/h
Different water quality and accuracy have different flow rate. Please contact supplier for the detail.
Min working pressure: 2Kg
If the working pressure is too low, then booster pump equipment can be set in the discharge pipeline.
Max working pressure: 10Kg; 150psi
High pressure type can be customized according to user’s requirement. Please contact supplier for the detail.
Filtering area:3000cm2 -20000 cm2
Max working temperature:50°C;
Please notify us if the temperature is above this.
|Weight||16 kg||34 kg||97.5 kg|
|Height||1556 mm / 61.25 in||1760 mm / 69.25 in||2591 mm / 102 in|
|Total capacity||3.5 L||14.8 L||41.6 L|
|Drain chamber capacity||119 mL||740 mL||6000 mL|
|Filteration area||772 cm2||1703 cm2||3935 cm2|
|Flow rate range||0.45 - 4.5 m3/hr||4.5 - 13.6 m3/hr||13.6 - 45.4 m3/hr|
|Max temperature||177 ℃||177 ℃||177 ℃|
|Max work pressure||300 psi / 21 bar||150 psi / 10.5 bar||150 psi / 10.5 bar|
|Air drive requirement||400/800=60 psi @ 5 cfm, 1600=800 psi @ 5 cfm (5 bar @ 8.5 m3/min)|
|Power supply||110 / 220 VAC, 50-60HZ, 1PH|
Contact Person: Mr. Murphy