All Flow Technology
|Place of Origin:||China|
|Minimum Order Quantity:||1|
|Packaging Details:||carton/wooden case|
|Delivery Time:||10-14 days|
|Payment Terms:||T/T, L/C, D/P, D/A, Western Union|
|Supply Ability:||2000 sets per month|
|Product Name:||Pneumatic Submersible Pump||Max Head Pressure:||8.4 Bar|
|Flow Rate Range:||568 L/min (150 Gpm)||Max Suction Head:||5.48 M|
|Max Grain Size:||4.8 Mm||Air Inlet/outlet Port Size:||1/2" FNPT|
|Fluid Inlet/outlet Port Size:||2" FNPT , BSP||Power:||Pneumatic, Compressed Air, Electric|
|Structure:||Diaphragm Pump||Warranty:||1 Year|
DN50 Pneumatic Diaphragm Pumps,
8.4 Bar Pneumatic Diaphragm Pumps,
145cpm Pneumatic Diaphragm Pumps
DN50 Air Operated Pneumatic Diaphragm Pump, Wet Part: PP/DI/SS304/316/PVDF For Sewage/Viscous Fluid/Strong Acid/Paint
The new generation pneumatic metering pump, is popular known as double acting diaphragm pump. It's driven by compressor air, are widely used for the large volume transfer of various harshly liquid fluid, such as: chemical, waste water, cement, paper pulpe, syrup, sewage, slurry, honey, paint, oil, petroleum, etc.
|Max working pressure:||100psi ( 0.7Mpa , 7bar)|
|Max flow rate:||150 gpm ( 570 lpm )|
|Max reciprocating speed:||145cpm|
|Max suction height:||5m|
|Max permitted grain:||6mm|
|Max air consumption:||175scfm ( 4.9m³/min )|
|Air inlet size:||1/2 in.npt (f)|
|Air outlet size:||1/2 in.npt(f)|
|Fluid inlet size:||2in.npt(f)|
|Fluid outlet size:||2in.npt(f)|
|Weight:||AL 29.0kg SST 47.0kg|
Waste water treatment, sludge, screening
Effluent treatment plant
Pharmaceutical feeds, transfer
Automotive wash, lube, oil
Ceramics mix & cast, glaze
Chemical injection, process
Pulp & paper batching, bleaching
Construction coating, dewatering
Food processing transfer, packaging
Marine bilge, cleaning
Mining utility, dewatering
Oil & gas transfer, clean up
The air-driven double diaphragm transfer pumps. No electrical components are required because the pumps are
air-driven. RD series pumps are run-dry safe and self-priming. The pump capacity can be controlled by changing
the pressure in the air supply. The air control is designed for oilfree operation. The RD series pumps are ideally
suited for the transport of liquid chemicals. It transports media at up 6,700 l/h and up to a discharge lift of 70 m.
As the pump capacity is highly dependent on the back pressure, the performance curve must always be observed.
At the sametime, the differential pressure between the hydraulic and pneumatic sides should not exceed 2 bar.
Higher values reduce the service life of the pump. When selecting pumps, check the material compatibility.
In addition, consider the density, viscosity and temperature of the transported medium.
Contact Person: Mr. Murphy